GV-DFR1352
The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use. |
Key Features |
|
DOWNLOAD:
Product Description
FEATURES
CPU | 8-bit microprocessor | |
Frequency | 13.56 MHz for ISO14443A ( MIFARE DESFire , MIFARE Plus and MIFARE Classic ) | |
Input Rating | 7.5V DC~12V DC, 200mA | |
Wiegand Interface | Wiegand 26 / 34 bit, distance 100 m (328.1ft), 24 AWG, 13V DC min., 85 °C min | |
RS-485 | 9,600 bps, connect up to 8 GV-RK1352 / R1352 / DFR1352 units Distance 600 m (1968.50 ft), 24 AWG, 13V DC min., 85 °C min |
|
Power Source | DC 7.5V – 12V | |
LED | Red, Green and Blue LED | |
Beeper | Buzzer | |
Color | Black | |
Supported ID Formats | Reads GID and UID | |
Operating Temperature | -35 °C ~ 66 °C (-31 °F ~ 150.8 °F) | |
Operating Humidity | 10 ~ 90% RH (non-condensing) | |
Dimensions (W x H x D) | 20.9 x 105.6 x 20.5mm (0.8 x 4.2 x 0.8 in) | |
Weight | 80 g (0.17 lb) | |
Ingress Protection | IP66 | |
Certification | CE, FCC, RoHS, UL, CUL |
Note:
1. RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
2. GID is only supported by GV-DFR1352 (Rev. B) firmware V1.2 or later.
3. UL 294 Attack Class Level 1 depends on other connected equipment.
4. If you are using third-party cards or key fobs, the reader must be under UID mode.
5. Specifications are subject to change without notice.
Customers review
Rate it!
Only logged in customers who have purchased this product may leave a review.
Write A ReviewReviews
There are no reviews yet.