Subscribe
Subscribe

IC-T10

VHF/UHF DUAL BAND FM TRANSCEIVER

The Icom IC-T10 is a rugged and reliable dual-band handheld transceiver designed for both amateur and professional use. It features a powerful 5W output, waterproof construction, and a long-lasting battery for dependable communication in various environments. With easy-to-use controls and clear audio, the IC-T10 is perfect for outdoor adventures, emergency response, and everyday communication needs.

5W RF Output in 144 and 430 MHz

1500 mW Loud and Intelligible Audio

IP67 Dust-tight and Waterproof

Home Button on the Top Panel for Quick Access to Calling Channel

Optional HM-222HLWP, Loud Audio SP-MIC

FM Broadcast Receiver

Up to 11 Hours* Operating Time

* 11/10 hours (VHF/UHF, approx.) with BP-280 battery at 1:1:8 duty ratio (Power save ON)

Other Features

  • DC power operation with optional AD-149H
  • Free CS-T10 downloadable programming software
  • Built-in CTCSS/DTCS for repeater operation
  • Total of 208 memory channels with 6 character channel name
  • 16 DTMF autodial memories
  • Priority, Program, Memory, Skip, and Tone Scan
  • Direct-conversion system eliminates IF stages

General

IC-T10
Frequency coverageUSA VersionTX144–148, 430–450 MHz*1 (* Working range)
RX136–174, 400–479 MHz*1 (* Working range)
FM broadcast88–108 MHz
Export VersionTX136–174, 400–479 MHz*2 (Working range)
RX136–174, 400–479 MHz*2 (Working range)
FM broadcast76–108 MHz
EUR VersionTX144–146, 430–440 MHz
RX136–174, 400–479 MHz*3 (* Working range)
FM broadcast76–108 MHz
Number of channels208 channels (including 2 call and 6 scan edges)
Type of emissionF2D, F3E (FM)
Frequency stability±2.5 ppm (–20°C to +60°C on the basis of 25°C )
Power supply requirement
External DC power

7.2 V DC nominal

10–16 V DC (with AD-149H)

Current drain (approx.)Tx HighLess than 2.5 A
Rx Max. audioLess than 600 mA
Antenna impedance50 Ω (SMA)
Operating temperature range–20°C to +60°C
Dimensions
(W × H × D, Projections not included)		52.2 × 111.8 × 30.3 mm,  2.1 × 4.4 × 1.2 in (with BP-280)
Weight (Approximate)278 g; 9.8 oz (with BP-280 and antenna)


*1 Guaranteed range 144–148, 440–450 MHz
*2 Guaranteed range 144–148, 430–440 MHz
*3 Guaranteed range 144–146, 430–440 MHz

You can scroll

Transmitter

IC-T10
Output power5 W, 2.5 W, 0.5 W
Max. frequency deviation±5.0 kHz/±2.5 kHz (W/N)
Spurious emissions

Less than –60 dBc (High, Mid),

Less than –13 dBm (Low)

Ext. microphone connector3-conductor 2.5 (d) mm (1/10ʺ)/2.2 kΩ
You can scroll

RECEIVER

IC-T10
Receiver sensitivityLess than 0.18 μV (at 12 dB SINAD)
Squelch sensitivityLess than 0.18 μV (at squelch threshold)
Adjacent channel selectivityMore than 55 dB (FM, 25 kHz)
More than 50 dB (FM Narrow, 12.5 kHz)
Spurious responseMore than 60 dB
Audio output power
(at 5% distortion, 8 Ω load)		Internal SP1500 mW (typical)
External SP450 mW (typical)
HM-222HLWP1500 mW (typical)
Ext. speaker connector3-conductor 3.5 (d) mm (1/8ʺ)/8 Ω


All stated specifications are subject to change without notice or obligation.

You can scroll

Applicable U.S. Military Specifications & IP Rating

Standard
 		MIL-810 G
MethodProcedure
Low Pressure500.5I, II
High Temperature501.5I, II
Low Temperature502.5I, II
Temperature Shock503.5I-C
Solar Radiation505.5I
Rain Blowing/Drip506.5I, III
Humidity507.5II
Salt Fog509.5–
Dust Blowing510.5I
Immersion512.5I
Vibration514.6I
Shock516.6I, IV


Also meets equivalent MIL-STD-810-C, -D -E and -F.

You can scroll
Ingress Protection Standard
Dust & WaterIP67 (Dust-tight and waterproof protection)

You can scroll

Supplied Accessories

  • BP-280 Battery Pack
  • FA-S270C Antenna
  • MB-133 Belt Clip
  • BC-213 Rapid Charger
  • AC Adapter (BC-242 or BC-123SA/SE)

Wireless Link Technologies, Inc.

  • Phone: (02) 8353 6086
  • Mobile: +63 917-8080WLT or 917-8080958
  • info@wireless-link.net
  • 544 Florentino Torres St., Sta. Cruz, Manila

Our Links

Support

  • © 2025 Wireless Link Technologies, Inc.

Subscribe to Our Newsletter

Join our community and stay updated with the latest news and updates delivered straight to your inbox.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.