iP380 IP Phone

BLF icons and Message Light indication IP Phone

  • 8 BLF icons (Busy extensions
    Indication) on LCD
  • Select and display FXO Line status
    via 8 BLF as Key Phone Set (KTS)
  • Message light indication (Ring, DND,
    No Answer call, voice mail)
  • LCD: 2 x 20 digits with 8 icons BLF
    display
  • Remote DTMF or Ring control Relay
    contacts to Open/Close
  • IPV6 and IPv4 Dual Stack
    simultaneously
  • 3 Lines Register to three SIP Servers
  • Auto Provision
  • Wall-mount installation without
    additional brackets
DOWNLOAD:

 

Categories: ,

Product Description

8 BLF icons on LCD display

iP380 provides BLF (Busy Lines/extensions status) with 8 icons 
on LCD display. It shows user name and phone number of this 
extension. Each iP380 can configure your favor or frequent
call extension or desire FXO Line. By showing busy extension 
status via flashing BLF icons, it helps your office work increase
efficiency.

Navigation Keys

iP380 provides Navigation Key (Up, Down, Left, Right) to Configure/View from LCD 
display along with OK (confirm change) and C (cancel and go back to previous page).

8 BLF icons work as Key Telephone Set (KTS)

iP380 can configures FXO Lines to BLF icons and work as KTS (Key Telephone Set).
Each FXO Line busy status can be seen from BLF icons and can be selected desire 
FXO Line to dial.

Specification

Interface:

◦ Ethernet port (RJ-45, 10/100Base-T)
▪ 1-WAN port connect to Ethernet Switch
▪ 1-LAN port connect to Computer
▪ PoE (IEEE 802.3af ) at WAN port : iP380A only
◦ Earphone/Microphone Jack (3.5mm) for Headset:
▪ Normal Open(NO), Normal Close(NC) Relay terminal:
LAN port free two pairs wire.
◦ Handset Jack (RJ-10)
◦ DC 12V/1A power input Jack
◦ LCD Display:
▪ Display Format: 20 Characters x 2 lines, icons x 8 pcs
▪ View Size: 99(W) x 24 (H) mm
▪ LCD Type: STN
◦ LCD Language: English and Portugal.

IP Network connection

◦ WAN: DHCP, PPPoE and Static IP
◦ Dynamic DNS (DDNS)
◦ VLAN on both WAN and LAN
◦ VID (802.1Q/TAG): 3 to 4094
◦ User Priority (802.1P): 0 to 7
◦ Voice QoS Support
◦ SIP QoS Support
◦ DNS Client
◦ VPN: VPN and L2TP
◦ NTP Time Setting with Daylight Saving time
◦ IPv4 (RFC 791), IPV6(RFC 2460)
◦ IPv6 Auto Configuration (RFC 4862),
◦ Static IPv6 Address, IPv6 in IPv4 Tunnel.
◦ LAN: Bridge and Router(DHCP Server)
◦ DMZ and MAC Clone Setting
◦ MAC Address (IEEE 802.3)
◦ TCP/UDP (RFC 793/768)
◦ RTP/RTCP (RFC 1889/1890)
◦ IPV4 ICMP (RFC 792), IPV6 ICMP(RFC 4443)
◦ TFTP Client
◦ HTTP/HTTPS Server
◦ Support IPV4 only, IPV6 only or dual stack mode

SIP Protocol :

◦ RFC3261 compliance
◦ Support up-to 3 SIP Register Accounts (IPv4 and IPv6 are selectable)
◦ Configure SIP port and RTP port
◦ SIP UDP Protocol
◦ Support SIP compact Form
◦ SIP Session Timer (RFC 4028)
◦ MD5 Digest Authentication
◦ Reliability of provisional responses PRACK (RFC3262)
◦ Early/Delay media support
◦ Offer/answer (RFC3264)
◦ Message Waiting Indication (RFC3842)
◦ Event Notification (RFC3265)
◦ REFER (RFC3515)
◦ Support DNS SRV to locate SIP Server (RFC 3263)
◦ Support STUN NAT Traversal
◦ Support “rport” parameter (RFC 3581)
◦ Configure user agent content
◦ Send Flash Event: DTMF, SIP INFO, SIP INFO(digit)
◦ Configure Encryption Type and key

Audio Codec :

◦ G.711 A-law/μ-law, G.723
◦ G.729A, G.726 (ADPCM), GSM
◦ Silence Suppression
◦ VAD/CNG
◦ Automatic Gain Control
◦ DTMF: In-band, Out of Band, RFC2833, SIP INFO.
◦ Adaptive/Configurable Jitter Buffer up to 96 packets
◦ Acoustic Echo Cancellation
◦ Full-Duplex Speaker Phone
◦ Volume Adjustment (Receiver and transmitter)

PREFERENCE:

◦ Customized Idle Text
◦ Clock, Daylight Saving, Call-timer
◦ Call History of Missed, Received and Dialed
◦ Dialing Plan
◦ Digit Manipulation
◦ Selectable Call Progress Tone
◦ Support Personal Music Ring
◦ Auto Answer Mode
◦ Support Auto Priority (Auto Switch) Calling
◦ Support Specified Line Calling

Call Features :

◦ BLF x 8 icons with Name and Number
◦ Caller ID display or inhibit
◦ Voice Mail with Indication
◦ Speed Dialing
◦ Phone Book x 140 records
◦ Flexible Dial Plan Setting – Drop Prefix and Replace Rule
◦ Call Waiting/Switching between Calls
◦ Call Forward (Busy, Unconditional, No Answer)
◦ Hotline function
◦ Alarm Time Setting
◦ Auto Answer set up
◦ Ring Timeout
◦ Do not disturb
◦ Call Hold
◦ Call Mute
◦ Call Transfer
◦ Configure Tone: Dial Tone, Ring back Tone, Busy Tone, Congestion 
Tone, Ring Tone and Call Waiting Tone.
◦ Music-on-hold support (via IPPBX or local)
◦ Conferencing (3-way conference over phone)
◦ Call Pickup (configure Code)
◦ Call Park/Retrieve (via IPPBX)
◦ Voice Broadcasting (via IPPBX)
◦ Redialing/pre-dialing
◦ Support Peer to Peer Dialing
◦ Reject Anonymous call

Software control Relay features:

◦ Configure to Normal Open(NO) or Normal Close(NC) Relay
◦ Activate by NO or NC
◦ Remote RFC2833 DTMF activate Relay contacts Open/Close
◦ Incoming Ring to activate Relay contacts Open/Close.
◦ Relay contact specification: 1A at 250V

MANAGEMENT:

◦ Multilanguage Web User Interface
◦ Administrative Telnet CLI Login
◦ 3 Levels of User Access Right with Password protection
◦ LCD Administration Login
◦ Provides System Status
◦ Diagnostics via syslog with different log type
◦ LAN port bandwidth limitation
◦ Configuration Backup/Restore
◦ Reset to Default
◦ Auto Provision via TFTP, HTTP and FTP with Schedule
◦ Auto update firmware via TFTP, HTTP and FTP with Schedule
◦ Firmware upgrade via webpage
◦ Disable WAN port management
◦ Configure WEB Login port (default is 9999)
◦ TR-069 (Option)

Environmental:

◦ Physical Dimension: 190(W) × 90(D) × 210(H) mm
◦ Weight: 1.1kg (One unit with packing)
◦ Single pack dimension: 225x195x115 mm
◦ Operating Temp. & Humidity
▪ Temp.: 0°C~45°C (32°F~113°F)
▪ Humidity: 10%~90% relative humidity, non-condensing
◦ Power Adaptor:
▪ INPUT: AC100V~240V, 50/60Hz
▪ OUTPUT: DC 12V, 1.0A
◦ Power Consumption of PoE : 5.5 Watts

Approvals:

◦ CE, FCC, LVD and RoHS