GV-DFR1352
The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use. |
Key Features |
|
Product Description
FEATURES
CPU | 8-bit microprocessor | |
Frequency | 13.56 MHz for ISO14443A ( MIFARE DESFire , MIFARE Plus and MIFARE Classic ) | |
Input Rating | 7.5V DC~12V DC, 200mA | |
Wiegand Interface | Wiegand 26 / 34 bit, distance 100 m (328.1ft), 24 AWG, 13V DC min., 85 °C min | |
RS-485 | 9,600 bps, connect up to 8 GV-RK1352 / R1352 / DFR1352 units Distance 600 m (1968.50 ft), 24 AWG, 13V DC min., 85 °C min |
|
Power Source | DC 7.5V – 12V | |
LED | Red, Green and Blue LED | |
Beeper | Buzzer | |
Color | Black | |
Supported ID Formats | Reads GID and UID | |
Operating Temperature | -35 °C ~ 66 °C (-31 °F ~ 150.8 °F) | |
Operating Humidity | 10 ~ 90% RH (non-condensing) | |
Dimensions (W x H x D) | 20.9 x 105.6 x 20.5mm (0.8 x 4.2 x 0.8 in) | |
Weight | 80 g (0.17 lb) | |
Ingress Protection | IP66 | |
Certification | CE, FCC, RoHS, UL, CUL |
Note:
1. RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
2. GID is only supported by GV-DFR1352 (Rev. B) firmware V1.2 or later.
3. UL 294 Attack Class Level 1 depends on other connected equipment.
4. If you are using third-party cards or key fobs, the reader must be under UID mode.
5. Specifications are subject to change without notice.