ePBX40

Built-in 4-port FXO gateway IP-PBX for small office

ePBX40 is small SIP based IP-PBX with built-in 4-port FXO gateway and allow external up to 60 IP devices to register. Configure both FXO and IP-PBX at the same webpage to reduce extra works during installation.This device is suitable for small office PBX application for inter-office calls, or it talks to remote office via internet or VPN inetwork.The local incoming call from PSTN Lines can be answered from assigned IP phone or group extensions. It is easy to connect with local PSTN Line or PABX’s extensions.

It supports Rich traditional PABX features and flexible connection with other analog Telephony and IP based devices. Calls can be implemented between them by using existing dial behavior without hassle.

DOWNLOAD:

Categories: ,

Product Description

Specification

  • Interface:
    • Ethernet port (RJ-45, 10/100 base-T)
    • 1-WAN port, connect to IP Network
    • 1-LAN port connect to local network
    • Built-in 4 ports FXO Lines (RJ-11 x 4pcs)
    • DC +12V power input Jack
    • LED Indicator for System, SIP and FXO/PSTN status
    • LED is flashing when RJ-11 wire was not connected
  • IP Network connection
    • IPv4 (RFC 791) for WAN and LAN ports
    • IP/ICMP/ARP/RARP/SNTP
    • Static IP
    • WAN : DHCP, Fixed, PPPoE, DDNS
    • LAN : Fixed Private IP
    • PPPoE Client
    • DDNS ( DynDNS )
    • DNS Client
    • NAT traversal for Voice and SIP signals only
    • Install behind NAT
    • Remote and local NTP server with time zone configuration
    • TCP/UDP (RFC 793/768)
    • RTP/RTCP (RFC 1889/1890)
  • SIP Protocol :
    • RFC3261 compliance
    • SIP UDP Protocol
    • Support SIP compact Form
    • Support SIP HOLD Type
    • MD5 Digest Authentication (RFC2069/RFC2617)
  • Audio Codec :
    • G.711 A-law/μ-law, G.729 pass-through
    • LEC : Line Echo Canceller
    • Packet Loss Compensation
    • Automatic Gain Control
    • G.168 Acoustic Echo Cancellation
    • Dialing Plan with Add and Drop dialing digits
    • Selectable Disconnect Tone configuration
    • Support Specified Line Calling
  • Call Features (built-in 4-port FXO Lines) :
    • Caller ID recognition DTMF (before/after 1st ring) and FSK (before 1st ring ),
      ETSI and Bellcore
    • Loop Current Drop Detection to release FXO port
    • Disconnect tone recognition to release FXO port
    • Record disconnect tone automatically for further analysis
    • Each extension can assign one Email address to forward left voice mail.
    • Superior Echo Cancellation on built-in FXO Gateway
    • Record disconnect tone automatically for further analysis
    • Two sets of Disconnect Tone are available to detect correctly.
    • Configure Tone Frequency, Cadence, Level and Cycle
    • Built-in a variety of Country’s tone default setting
    • NAT Traversal configurable
    • Out-Band DTMF : RFC2833 and SIP Info
    • Call Waiting Indication
    • Busy Line Call Monitor : Caller/Called number, start/stop time.
    • Extension and Trunk current setting indication
    • Call Forward (Busy, Unconditional, No Answer, unavailable)
    • Configurable Call and Pickup group
    • Call Hold
    • Call Transfer
    • Call Park
    • Flexible Dial Plan
    • Configurable Feature Codes (PABX features) to dal from keypad
    • Support 2 Offices/Locations call rule to configure
    • Call-in Rule : desire working/non-working time, Operator Group, desire
      Auto-Attendant play time.
    • Outgoing Routing Rule (Drop and Add)
    • Incoming Routing Rule (Drop and Add)
    • Extension Group Setting
    • Hot Line
    • Configure maximum concurrent SIP or FXO Trunk calls
    • Desire Trunk ID call
    • SIP Trunk registration setting
    • Outgoing SIP Caller ID Selection
    • Flexible Routing Plan
    • BLF, Busy Extension Status Indication
    • ON-HOOK Voltage: -48Vdc
    • Provide real time CDR to external Billing server or store inside
    • CDR Storage inside ePBX80 up to 500 records.
  • MANAGEMENT :
    • Administrative Telnet, CLI and HTTP (Windows IE Browser Only)
    • HTTP port and user ID, Password control
    • Telnet port and user ID, Password control
    • Firmware and Library upload
    • Hold Tone (Music RBT) File upload
    • Import(Upload) Configuration, IVR package, IVR(gsm/g729) file
    • Export(Download) Configuration, IVR package for backup.
    • Configuration Backup/Restore
    • Reset to Factory default setting
    • Soft-Reset or Reboot System
    • Status display: Line, SIP Trunk status
    • RS-232 DB9 Console port
  • Environmental :
    • Physical Dimension: 17.5(W) × 3.2(H) × 12.6(D) CM
    • Weight: 0.9kg (One unit with packing)
    • Operating Temp. & Humidity
      • Temp.: 0°C~45°C (32°F~113°F)
      • Humidity: 10%~90% relative humidity, non-condensing
    • Maximum Power Consumption: 10 Watts (0.8A at 12Vdc)
    • Power Adaptor:
      • INPUT: AC100V~240V, 50/60Hz
      • OUTPUT: DC 12V, 1.5A
  • Approvals:
    • CE, FCC, LVD and RoHS